Alerts & Learnings Archive

View all Alerts and Moments older than this year.

View Latest

Search for Safety Alerts & Learnings

Play your part in improving workplace safety. Browse our extensive catalogue of Safety Alerts and Learnings to learn from the experiences of industry colleagues.

Alert
Scis main logo colour

Hazards to Personnel During Lifting Operations

The United States Bureau of Safety and Environmental Enforcement (BSEE) has published Safety Alert 468 relating to “red zone” or LINE OF FIRE hazards and increased risk during lifting operations. BSEE defines “red zone” hazards, as hazards that “occur when a worker is in the direct path of an objec…

Alert
Scis main logo colour

Finger Injury while setting up pipe cutting operation

A crew member was setting up a pipe cutting machine in a vertical position to cut welding that was done on a jumper for repair, when they suffered a finger injury. The crew member opened a supply valve on an air caddy with his left hand, while his right hand was on a scaffold tube supporting the equ…

Alert
Scis main logo colour

Fall from pilot ladder

A Chief Officer slipped and fell from a pilot ladder onto a lifeboat, suffering minor bruising. The incident occurred on a vessel which was coming to the end of ten days spent alongside in a shipyard. The crew were performing a last pre-departure mandatory drill, which was a man overboard recovery w…

Alert
Scis main logo colour

Fatality due to fire incident and fall from height

A rope access technician had a fatal fall from around 8.5m while engaged inroutine maintenance activities on a pipelay tower. Work was conducted by different vessel work groups, with each team independently completing their permits to work, following the vessel’s safety management system’s requireme…

Alert
Scis main logo colour

Hazardous Substances – Water Bottles Used for Chemicals

On a member’s vessel, during a recent inspection of the engine room and steering flat spaces, it was observed that unknown fluids were stored in unsuitable containers. On investigation to clarify the contents, it was reported as being coolant for steering motors. To view this Marine Safety Forum saf…

Alert
Scis main logo colour

HSE Alert - Manage risk of damage to grating systems (walkways and deck areas) on offshore installations during rig moves

Target Audience: Dutyholders (including Operators and owners of offshore installations) undertaking rig moves on the UKCS Issue Grating-systems (used on walkways and deck areas) on offshore installations can be damaged or dislodged during rig moving operations. People may be harmed if walkways and e…

Alert
Scis main logo colour

BSEE: Improper use and application of high-pressure hoses

During a recent offshore inspection, a BSEE inspector observed operator personnel installing a 30m high pressure hose, with a Maximum Working Pressure (MWP) of 5000 psi, to test pressure safety valves on pipeline pumps. The hose used was designed for hydraulic fluid and was not suitable for high-pre…

Alert
Marine safety logo

MSF: Air Cylinder – High Pressure Discharge

During preparations to land a leaking breathing apparatus bottle ashore, a crew member was draining the remaining pressure from the bottle when the pillar valve broke off from the top. On inspection of the damaged valve, it was found that there was a fracture of the threaded end which had resulted i…

Alert
Scis main logo colour

Paper shredder – explosion

There was a small explosion in an office paper shredder. It happened after the blades were lubricated to ensure that the paper shredder cutting blades ran smoothly and to prevent paper jams after a period of intensive use. The method adopted, was to spray WD-40 silicone lubricant onto a sheet of pap…

Alert
Scis main logo colour

Getting fall arrest equipment right

A crew person was changing the lamp bulbs on the vessel mast, working at a height of around 4m above the deck. The person was wearing a full set of PPE including a certified safety harness with a lanyard equipped with a shock absorber. There was a Permit to Work in place. However, the total length o…

Alert
Scis main logo colour

Fatality during transfer of pipes

A member passes information to IMCA relating to a recent fatality on a ship alongside. The incident occurred during the transfer of pipework between the quay and vessel. The incident is still under investigation by the local authorities. This flash serves to raise awareness, as lifting operations a…

Alert
Scis main logo colour

HSE - Potential issue regarding the testing of boots to an American Standard: ASTM F2412-18A

HSE has been made aware of a potential issue regarding the testing of boots to an American Standard; ASTM F2412-18A. The ASTM Standard contains a single test procedure representative of a very restricted working environment. In many cases, these limitations have not been made clear on the packaging …