Alerts & Learnings Cook got chemicals in eye The Marine Safety Forum (MSF) published Safety Alert 24-10 relating to an incident in which a cook got chemicals splashed in the eye. The incident occurred during the routine cleaning of the galley after dinner service was complete. The vessel cook used Foaming Oven Cleaner which contained Sodium Hydroxide. This was sprayed into the cooker hood, leaving it a while to activate. The cook returned soon after to inspect the area being cleaned when some of the chemical cleaner dropped from the cooker hood, falling between the cook’s prescription glasses and the left eye. The cleaning solution made contact with the cooks left eyeball causing severe irritation and a burning sensation. First response included a thorough cleanse of the cook’s eye using sterile eye wash and Fluorescein Eye Drops. As a precautionary measure the Coastguard Doctor was called who advised that the cook should be medevac’d and so was airlifted to a local hospital for review and further treatment. To view this MSF safety alert published by IMCA in full, click the 'Download Alert' button above. Download Alert Rate this Alert Your Rating Average Rating Share: Share on Linkedin Share on Facebook Share on Twitter Share with Email
Alert 28 Jul 2025 Potential Dropped Objects (PDOs) returned with units In the offshore environment Potential Dropped Objects (PDO’s) are a major safety risk as the transportation of units is normally completed using cranes and lifting items great heights. This poses the risk of items falling and striking personnel in the vicinity. Over the years, many PDO’s have been d… View Alert
Alert 10 Jun 2025 Dropped Object Due to Corroded Deluge Flange After landing a lower completion assembly on the drill floor and while retracting the deck crane whip line and twin hook stinger back through the v-door, the twin hook stinger swung to starboard causing one of the hooks to strike a blanking flange on the drill floor deluge line. The 4.95kg blanking … View Alert
Alert 10 Jun 2025 Rust Particle Enters Eye During Spool Removal A Mechanical Tech was tasked with the removal of a spool. Due to the location of the spool, the technician had to work in a restricted space, lying on their back to access the flange bolts. During removal, the IP felt what they believed to be rust, hit their face. Following this, the IP re-positione… View Alert