Alerts & Learnings Emergency musters and drills Incident 1 – Emergency button stuck During an emergency drill, it was found that the General Emergency alarm on the bridge was delayed whilst being activated. Further investigation revealed that dedicated Emergency button was stuck, and it failed to perform its function in a timely way during the drill. Incident 2 - Near Miss – Smoke at muster station A fire alarm was set off on the port side muster station where there was a smoking area. An AB and the 2nd Mate were sent to investigate what was going on. On arrival at the muster station there was dense smoke coming from the ashtray stand. The ashtray was opened, and a smouldering paper cup was found, along with recently discarded cigarette butts. The smoker had, instead of bringing the cup to the dedicated waste bin which is just 10 metres away, just opened the standing ashtray and dumped the paper cup together with the still burning cigarette butt and closed it. This action caused smouldering and a small fire and could have developed into a much more serious situation. To view this IMCA safety alert in full, click the 'Download Alert' button above and refer to section 4 of the document. Download Alert Rate this Alert Your Rating Average Rating Share: Share on Linkedin Share on Facebook Share on Twitter Share with Email
Alert 28 Jul 2025 Potential Dropped Objects (PDOs) returned with units In the offshore environment Potential Dropped Objects (PDO’s) are a major safety risk as the transportation of units is normally completed using cranes and lifting items great heights. This poses the risk of items falling and striking personnel in the vicinity. Over the years, many PDO’s have been d… View Alert
Alert 10 Jun 2025 Dropped Object Due to Corroded Deluge Flange After landing a lower completion assembly on the drill floor and while retracting the deck crane whip line and twin hook stinger back through the v-door, the twin hook stinger swung to starboard causing one of the hooks to strike a blanking flange on the drill floor deluge line. The 4.95kg blanking … View Alert
Alert 10 Jun 2025 Rust Particle Enters Eye During Spool Removal A Mechanical Tech was tasked with the removal of a spool. Due to the location of the spool, the technician had to work in a restricted space, lying on their back to access the flange bolts. During removal, the IP felt what they believed to be rust, hit their face. Following this, the IP re-positione… View Alert