Alerts & Learnings Finger injury during emergency recovery of ROV A worker suffered a serious finger injury when their finger was caught between a crane wire and the recovery hook on an ROV. The incident occurred during an emergency recovery of the ROV. A small boat (an FRC) was used to facilitate connecting the ROV emergency rigging sling to the crane hook to allow recovery of the ROV to deck. Movement of the crane headache ball was controlled by having it slightly submerged and having the forerunner with ROV hook tied up with a rope to the crane wire. The plan was for a second person to use the boathook to retrieve the ROV/crane hook, which would then be connected to the emergency rigging. When it was connected to the crane, the securing line from the ROV to the FRC would then be released. The worker successfully retrieved the emergency rigging on the ROV and attached it to the FRC by a securing rope. Then the FRC moved away from the vessel and the crane operator on the vessel started paying out wire and manoeuvring the rigging towards the FRC. However, before retrieving the crane hook, the worker had to release the ROV hook attached to the crane wire with a thin rope, using a knife. As the worker did so, their finger was pinched, resulting in an amputation down to approximately the nail bed on the left ring finger. To view this IMCA safety alert in full, click the 'Download Alert' button above and refer to section 1 of the document. Download Alert Rate this Alert Your Rating Average Rating Share: Share on Linkedin Share on Facebook Share on Twitter Share with Email
Alert 28 Jul 2025 Potential Dropped Objects (PDOs) returned with units In the offshore environment Potential Dropped Objects (PDO’s) are a major safety risk as the transportation of units is normally completed using cranes and lifting items great heights. This poses the risk of items falling and striking personnel in the vicinity. Over the years, many PDO’s have been d… View Alert
Alert 10 Jun 2025 Dropped Object Due to Corroded Deluge Flange After landing a lower completion assembly on the drill floor and while retracting the deck crane whip line and twin hook stinger back through the v-door, the twin hook stinger swung to starboard causing one of the hooks to strike a blanking flange on the drill floor deluge line. The 4.95kg blanking … View Alert
Alert 10 Jun 2025 Rust Particle Enters Eye During Spool Removal A Mechanical Tech was tasked with the removal of a spool. Due to the location of the spool, the technician had to work in a restricted space, lying on their back to access the flange bolts. During removal, the IP felt what they believed to be rust, hit their face. Following this, the IP re-positione… View Alert