Alerts & Learnings

Injury to little finger

A worker suffered an injury whilst painting an auxiliary winch drum following maintenance. While performing this work a wooden beam was used to prevent the drum from turning freely. Two painters, along with their supervisor, inspected their work area and conducted a toolbox talk before beginning to clean the winch drum base. While cleaning the auxiliary winch drum base, the painters needed to rotate the drum for better access. The two painters manually rotated the drum, one person holding it secured in position, while the other person repositioned the wooden beam to secure the drum. The two workers repeated this process twice without incident. However, the third time, one painter attempted to rotate the drum alone, as the other painter was not present. While positioning the wooden beam to secure the winch drum, the drum rotated back, trapping the his little finger between the beam and the winch base. This resulted in a broken finger.

To view this IMCA safety alert in full, click the 'Download Alert' button above and refer to section 4 of the document.

Download Alert

Rate this Alert

Your Rating

Average Rating

More from this Workgroup

Alert
Scis main logo colour

Potential Dropped Objects (PDOs) returned with units

In the offshore environment Potential Dropped Objects (PDO’s) are a major safety risk as the transportation of units is normally completed using cranes and lifting items great heights. This poses the risk of items falling and striking personnel in the vicinity. Over the years, many PDO’s have been d…

Alert
Scis main logo colour

Dropped Object Due to Corroded Deluge Flange

After landing a lower completion assembly on the drill floor and while retracting the deck crane whip line and twin hook stinger back through the v-door, the twin hook stinger swung to starboard causing one of the hooks to strike a blanking flange on the drill floor deluge line. The 4.95kg blanking …

Alert
Scis main logo colour

Rust Particle Enters Eye During Spool Removal

A Mechanical Tech was tasked with the removal of a spool. Due to the location of the spool, the technician had to work in a restricted space, lying on their back to access the flange bolts. During removal, the IP felt what they believed to be rust, hit their face. Following this, the IP re-positione…

Join over 185 organisations making a difference

Membership connects your organisation to shared expertise, practical resources and collaborative leadership in safety and wellbeing.

I Stock 2218565815