Alerts & Learnings Property Damage – Scaffolding Lifting Frame An establishment were requested to erect scaffolding at the request of the platform to support another contractor with operations to pull out a seal that was stuck on a wellhead. A rigging arrangement was applied to the scaffold lifting frame and a scaffold ladder beam failed and bent during lifting operations. Why it Happened? Inadequate job planning – The lifting frame constructed was for 1 tonne only. However, the rigging arrangement was for 3 tonnes. The Scaffolding Manual was not consulted for the lifting frame and it cannot be said that the structure was in accordance with the requirements put in place. Download Alert Rate this Alert Your Rating Average Rating Share: Share on Linkedin Share on Facebook Share on Twitter Share with Email
Learning Moment 5 Feb 2026 Life Saving Rules This pack contains an overview of each Life-Saving Rule (LSR) with relevant incident examples. Whilst not all of the incidents occurred within our industry, the learnings remain applicable. You may wish to use this pack during safety meetings or break it up and use the individual sheets provided wit… View Learning Moment
Alert 15 Mar 2024 Pipeline End Manifold yoke dropped from 45° position During adjustment of the yoke securing arrangement for a PLEM (Pipe Line End Manifold), the cargo strap failed resulting in the yoke falling and landing in its horizontal resting position. Two persons were working inside the PLEM in close proximity to the yoke at the time. Neither were injured. Whi… View Alert
Alert 18 Jan 2024 Chain hoist paid out unsupervised near running main engine An electric chain hoist on the beam above one of the main engines in a vessel, was left unattended after use. The chain hook paid out and coiled the chain onto the running main engine close to the generator drive shaft. The incident occurred when the chain hoist was being used to lower spare parts r… View Alert