Alerts & Learnings Saturation diver exposed to chemicals from pipeline The incident occurred during a bell run to disconnect a 5cm pigging/flushing hose. During the disconnect process, the diver became exposed to the contents of the pipeline. The diver noted discomfort to exposed areas of the wrists and arms and was recalled to the bell. At the bell, the affected areas were cleaned with a mild soap. The divers’ suit and gear were removed and stored on the outside of the bell. The bell run was terminated, and the divers returned to the chamber complex for evaluation and monitoring. In the chamber the diver thoroughly washed with soap and cool water, and applied burn cream to the affected areas. Subsequently the diver noted light scabs forming on the left forearm and light blisters on the right, and burn cream was applied. The divers went onto decompression shortly afterwards as the job was over. The company Diving Medical Officer diagnosed first degree chemical burns to the neck and second degree chemical burns to both forearms. The diver was in due course cleared to return to assigned duties. To view this IMCA safety alert in full, click the 'Download Alert' button above. Download Alert Rate this Alert Your Rating Average Rating Share: Share on Linkedin Share on Facebook Share on Twitter Share with Email
Alert 28 Jul 2025 Potential Dropped Objects (PDOs) returned with units In the offshore environment Potential Dropped Objects (PDO’s) are a major safety risk as the transportation of units is normally completed using cranes and lifting items great heights. This poses the risk of items falling and striking personnel in the vicinity. Over the years, many PDO’s have been d… View Alert
Alert 10 Jun 2025 Dropped Object Due to Corroded Deluge Flange After landing a lower completion assembly on the drill floor and while retracting the deck crane whip line and twin hook stinger back through the v-door, the twin hook stinger swung to starboard causing one of the hooks to strike a blanking flange on the drill floor deluge line. The 4.95kg blanking … View Alert
Alert 10 Jun 2025 Rust Particle Enters Eye During Spool Removal A Mechanical Tech was tasked with the removal of a spool. Due to the location of the spool, the technician had to work in a restricted space, lying on their back to access the flange bolts. During removal, the IP felt what they believed to be rust, hit their face. Following this, the IP re-positione… View Alert