Alerts & Learnings Water injection over-pressurisation Animated moment with voice over (MP4) This Safety Moment is based on real events that led to the over-pressurisation of a water injection system. This moment touches on the Process Safety Fundamentals and how they can be used to prevent recurrence of similar events. Download Learning Moment Rate this Learning Moment Your Rating Average Rating Share: Share on Linkedin Share on Facebook Share on Twitter Share with Email
6 Jan 2025 TEMPSC (Lifeboat) Diesel Fuel Quality TEMPSC – Totally Enclosed Motor Propelled Survival Craft (Lifeboat) During a planned replacement, a free fall TEMPSC was launched to sea from its installed location on a fixed offshore installation. When sea borne, marine personnel boarded the TEMPSC and started the engine to manoeuvre it so rigging… View Learning
15 Jan 2024 When would you shut down? Time is critical. When would you shut down? Think about how a similar situation might occur at your site: If a gas leak is identified what steps are taken? How do you know everyone is empowered to shut down the asset? When do you make the decision to shut down? What are the implications of delaying… View Learning
27 Mar 2023 Cracking in small bore piping due to vibration Two events occurred at the same facility associated with small bore piping failures resulting in a loss of primary containment Event 1 - an operator identified a gas leak from a bleed valve on a relief path from a natural gas booster compressor via visual observation during operator rounds. A leak c… View Learning